Pretest in an inconspicuous location for color fastness and fibre stability.
Pump-up or Power Sprayer: For Light Soil Conditions: Mix 1 – 2 oz of Attack into 1 gal (3.78 L) of warm to hot water. Mix until completely dissolved (up to 1:128 Dilution).
For Heavy Soil Conditions: Mix 2 – 3 oz of Attack into 1 gal (3.78 L) of warm to hot water. Mix until completely dissolved (up to 1:64 Dilution).
Hydro-Force™ Sprayer: 4:1 Dilution (No Tip): Mix 10 oz of Attack into Hydro-Force jug and fill with hot water. Shake until completely dissolved.
8:1 Dilution (Yellow Tip): Mix 18 oz of Attack into Hydro-Force jug and fill with hot water. Shake until completely dissolved.
For best results: Pile lift or vacuum carpet prior to cleaning. Spray diluted Attack pre-conditioner onto carpet at the rate of 800-1000 square feet per gallon (3.78 L). Agitate presprayed area using a carpet groomer. Allow 15 minutes dwell time, then rinse with Esteam Fibre Rinse solution in conjunction with hot water extraction.
Caution: Product not recommended for use on wool or natural fibres.
Note: Do not mix Esteam Attack with any other chemical product.