Description

These Beam power units are designed to run much quieter with its Quiet Pak™ sound insulation system and carbon filter for better air quality around the unit.
Designed by Hide-A-Hose!
Rapid Flex central vacuum hoses are made of scratch resistant material that does not require a hose sock.

With Beam’s largest motor at 680 air watts, you can easily install this into a home or workplace up to 12,000 square feet in size.
A 7.2″ wide motor with dual fans has the most power in Beam’s vacuum selection, and since 2019 the unit has been manufactured in Canada.
This is the ideal choice for large homes or in smaller homes being used daily, with this larger motor offering a longer lifespan than traditional motors.
All Beam Classic and Serenity models have soft start motors which helps prevent premature wear as they start with ease.
An extra large bagless 25 litre dirt receptacle has clamp connections for a tighter, more secure, seal.
Embedded in the receptacle is Alphasan, an antibacterial agent designed to minimize odours.

Like all Beam Central Vacuum Power Units this model carries a lifetime warranty on its permanent filter. Yes, no more replacing or having to clean dirty vacuum filters.
This lifetime warranty is possible because of the Gore Technologies™ HEPA CleanStream™ filter. From the developers of Gore Tex™, this filter is designed maintain proper airflow throughout its lifetime.
For convenience, there is a utility inlet built right in to the front of the canister, making it easy to plug right into the can for cleaning out the car or truck if the vacuum is installed in the garage.

Rapid Flex hoses pull out more easily and retract faster than hose kits, and are a larger diameter, increasing air flow 20 -30%. Our new Rapid Flex hoses feature the mini-cuff, which allows tools to fit directly onto the hose cuff for easier use.

Package Includes

Beam 398 Central Vacuum Unit – 10 Years Warranty
(1) HS5000 Valve Rough In Kit
(1) HS5000 Valve Trim Kit
(3) 90 Degree Elbow
(1) 45 Degree Elbow
(1) 22.5 Degree Elbow
(1) Hide a Hose with sock
(1) Ready Grip Direct Connect w/o RF
(1) Telescopic Metal Wand
(1) 4-Piece Tool Set (Floor Brush, Dusting tool, Upholstery tool, Crevice Tool)

Looking For Central Vacuum Installation? 

Vacuum Specialists team provides the BEST Central Vacuum installation services, vacuum Repair and Clean Up services.

Please give us a call or click right bottom corner Grean Circle to leave a message.

REASONS YOU SHOULD CHOOSE A BEAM CENTRAL VACUUM Click Me

HOW TO CHOOSE VACUUM? Three Tips to help you! Click Me

Additional Information

Airwatts: 680 Air Watts
Running: 13 amps
Peak: 14.5 amps
7.2″ dual suction fan motor for better airflow
Soft start motor for increased life
Sound level 78 dBA
Gore Technologies™ HEPA CleanStream™ self cleaning filter
6′ power cord
Bagless receptacle with clamp connections
25 litre antibacterial lined receptacle
Utility inlet on front of unit
Unit is 14″ in diameter and 42″ in height
10 year motor and electronics warranty
Lifetime warranty on non electrical parts including filter
1 year labour warranty

HOW A CENTRAL VACUUM WORKS

BEAM Central Vacuum Systems use specifically designed tubing installed in the walls of your home to carry 100% of the contacted dirt, dust and allergens away from your living area to the central power unit commonly located in the garage, utility room or basement.

To activate the system, simply insert the lightweight hose into a central vacuum wall inlet valve. Most homes will typically have one central vacuum inlet valve per floor averaging three per house. The flexible lightweight hose and inlet system allow you to easily move from room to room without having to push a heavy upright vacuum or pull canister vacuum behind commonly bumping into walls or valuable furniture.

BEAM Central Vacuum Systems are much quieter than most portable vacuums as the power unit of a central vacuum is located outside of the living, where the motor of a portable vacuum is in the same room you clean.

1. Tubing installed through interior walls, attic, basement and crawlspaces connects vacuum inlets to the power unit.

2. Each strategically located inlet valve lets you vacuum approximately 700-800 square feet.

3. The power unit is located away from the living area, usually in a basement, garage or ventilated utility room.

4. Innovative accessories like the VacPan can be incorporated into the system for additional cleaning ease.

5. A variety of cleaning attachments such as a crevice tool, a dusting tool and the fabric tool allows you to vacuum any type of surface.

6. Exhausted to the outside or through a HEPA filter system to leave you nothing but clean indoor air.