Description

MagikTimer Plus Electronic Vending Timer – Input Voltage: 120vac or 24vac, Max Load Output: 20A at 120vac, Dimensions: 3-11/16in W x 5-5/16in H x 1-3/4in D

Features:

• Can be used to directly control high current devices such as vacuum motors.
• Easy installation – adapts to most coin acceptors.
• Ideal for any time vending application – including car wash, water & shower vending.
• Wide range of coin and time settings – up to 16 coins to start and 17 minutes per coin.
• Accumulates time for each coin. Over 9 hours of time can be accumulated with no limit to the number of coins.
• Crystal controlled microcontroller provides exact timing.
• Last Minute Alert feature operates horn or light to signal that one minute of time is remaining.
• Start delay feature gives customer preparation time after depositing coins.
• Coin verification feature sounds an attached horn as coins are accepted for time credit.
• One Coin Restart feature gives customer 20 seconds at end of cycle to add one or more coins to restart timer. External indicator light may be connected to timer to flash during this 20 second period.
• All features may be enabled or disabled via switches.
• Reset switch allows for easy testing.

Additional Information

The MT580 MagikTimer is a rugged, full feature microprocessor based timer. Ideal for any vending application – including car wash, shower, and water vending. Can be used to directly control high current devices such as vacuum motors. Easy installation – adapts to all popular coin acceptors. Wide range of coin and time settings. Over 9 hours of time can be accumulated with no limit to the number of coins. Last minute alert, start delay, one coin restart, coin verification, coin counter interface, and reset switch are all standard features. Operates from 120vac or 24vac.