Esteam Tile & Grout Sealer 1 Gallon

• pH: 4.3
• Dilution Ratio: Ready to use
• Available in: 3.79 L
• Part number: C101-935/ 1680-2112/ Viper Grout & Concrete Sealer

DIRECTIONS FOR USE:

• Pretest in an inconspicuous area for compatibility.
• Prepare surface by cleaning with Esteam Tile & Grout Neutral Cleaner, rinse floor thoroughly with clean water, remove excess water, allow to dry.
• This product is ready to use, do not dilute: For best results Tile & Grout Sealer should be applied to clean dry floors.
• Avoid over spray onto surrounding surfaces.
• Evenly appy a liberal amount of sealer by using a pump up sprayer, mop or roller for full coverage.
• If only sealing grout, a small brush can be used.
• Wipe off or squeegee any excess from non porous tile surfaces.
• Allow sealer to penetrate for 15 to 20 minutes then wipe up extra sealer.
• A second coat may be applied for those extra porous and absorbent surfaces after 30 minutes.
• One gallon of Tile & Grout Sealer protects approximately 400 to 800 square feet of surface. Coverage will vary depending on porosity and absorbency of the tile and grout.
• Sealer cures in 24 hours, foot traffic can resume after 8 hours.

Esteam Cleaning Systems professional chemical products are premium quality concentrated formulations that produce excellent results and solve the toughest soiling conditions encountered by the professional cleaner.

All of our products are color coded by type to make it easier when selecting a product.

Vacuum Specialists offers the highest quality Cleaning Products at the lowest prices in Canada, and are one of the largest suppliers of Cleaning Products in all of Canada. Please give us a call or click right bottom corner Green Circle to leave a message if you have any questions.